Draft it micro lessons are a series of short demonstration videos each lasting a maximum of one minute. The idea is to keep the detail brief whilst providing sufficient information to obtain a basic understanding of the subject matter, allowing you then to explore the full variation possible once the basics are understood.
They are arranged in the following categories:
Activaton Input Modes Drawing Modifying Annotation Architectural Views and Settings GeneralIf you have exceeded the maximum amount of retrys while trying to activate Draft it then this video will guide you through the process of activating the software.
Updated On: 29/11/2019
This short video will give you guidance on what to do if you can not find any of your purchase information for Draft it.
Updated On: 29/11/2019
This short video will give you guidance on what to do if you can not find your order referance for Draft it.
Updated On: 29/11/2019
This short video will give you guidance on what to do if you do not have your purchase eamil address information for Draft it.
Updated On: 29/11/2019
This short video will guide you through the process of activating all of the different paid for versions of Draft it.
Updated On: 29/11/2019
This short video will guide you through the process of entering the activation code that you have received by email for Draft it.
Updated On: 29/11/2019
This short video will guide you through the process of activating purchased versions of Draft it when there is no available internet connection.
Updated On: 29/11/2019
This short video will guide you through the process of turning the start up screen on and off in the Draft it user interface.
Updated On: 29/11/2019
You can use the keyboard arrow keys to specify an input direction, for example pressing the right arrow key to enter a distance to the right of the current point.
Updated On: 05/12/2019
This short video will give you guidance on how to snap (attach) the different point types in Draft it.
Updated On: 05/12/2019
This feature in Draft it is called 'Direct Input'. The demonstration here shows that you can easily input dimension values whenever system requires a point to be defined.
Updated On: 05/12/2019
Did you know you can enter calculations rather than workin out the answer before inputting the value.
Updated On: 05/12/2019
When activated this feature remembers the snap points browsed over by the cursor. Draft it then displays horizontal and vertical guides to these points whenever the cursor is in line with them.
Updated On: 05/12/2019
Learn how to specify distances relative to other positions on a drawing.
Updated On: 05/12/2019
X & Y snapping allows the X and Y values of a new point to be defined with the X value of one point and the Y value of another.
Updated On: 05/12/2019
The input angle to new points can be 'locked' in 45 degree increments.
Updated On: 05/12/2019
When switched on Draft it will 'snap' to a position exactly where no snap point (e.g. mid point) exists on an entity rather the exact cursor position.
Updated On: 05/12/2019
Learn the basics of how to draw a line.
Updated On: 05/12/2019
Draw a line with a specific length.
Updated On: 05/12/2019
Draw a line using X and Y values.
Updated On: 05/12/2019
Learn how to draw a line at a specified angle.
Updated On: 05/12/2019
Draw an arc through 3 points on the arc circumference.
Updated On: 05/12/2019
Draw an arc by defining the centre point then the start point of the arc, this also defines the radius.
Updated On: 05/12/2019
Learn how to draw an arc and type in the radius value.
Updated On: 05/12/2019
Learn how to draw a circle and type in the radius value.
Updated On: 05/12/2019
Learn the basics of how to draw a circle.
Updated On: 05/12/2019
How to draw a rectangle (by defining 2 points).
Updated On: 05/12/2019
How to create offsets of existing entities.
Updated On: 05/12/2019
The basics of Polyline creation.
Updated On: 05/12/2019
Fitting a curve between a series of points.
Updated On: 05/12/2019
Create a automatically filled polyline.
Updated On: 05/12/2019
How to draw an ellipse in Draft it.
Updated On: 05/12/2019
How to create a polygon (any number of sides).
Updated On: 05/12/2019
Learn about construction lines in Draft it.
Updated On: 05/12/2019
How to create a revision cloud entity.
Updated On: 05/12/2019
Use the divide command to create a series of equi-spaced points along an entity.
Updated On: 05/12/2019
Adding and using points on your drawings.
Updated On: 05/12/2019
Learn how to colour fill areas on your drawings.
Updated On: 05/12/2019
The basics of cross-hatching areas on your drawings.
Updated On: 05/12/2019
How to add system hatch patterns to areas on drawings.
Updated On: 05/12/2019
Use this command to create a number of equi-spaced copies in a line.
Updated On: 05/12/2019
Use this command to create a number of equi-spaced copies around a centre point at a given radius.
Updated On: 05/12/2019
Learn how to create an XY grid equi-spaced copies.
Updated On: 05/12/2019
Adding bitmap images to drawings.
Updated On: 05/12/2019
Learn how to move objects in Draft it.
Updated On: 05/12/2019
Learn how to copy an object within a drawing.
Updated On: 05/12/2019
Copy items to the clip board and to/from other applications.
Updated On: 05/12/2019
Use the Trim command to remove sections of entites using other entities as boundaries.
Updated On: 05/12/2019
Learn how to shorten or increase the length of a line or arc.
Updated On: 05/12/2019
Quick trim lets you remove entity sections with a single click.
Updated On: 05/12/2019
Learn how to create a Mirrored copy of objects.
Updated On: 05/12/2019
Learn how to Rotate objects around a point .
Updated On: 05/12/2019
Increase of decrease the size of objects using the scale command.
Updated On: 05/12/2019
How to stretch items on you Draft it drawings.
Updated On: 05/12/2019
Use this command to break arcs, lines and circles at specific points.
Updated On: 05/12/2019
How to create a Fillet blend radius between two lines.
Updated On: 05/12/2019
Creating blend radii between lines/arcs/circles.
Updated On: 05/12/2019
How to create an XY Chamfer between two lines.
Updated On: 05/12/2019
Use selection filters to identify and select items matching specific criteria.
Updated On: 05/12/2019
Use the select hyperlink command find hyperlinks on a drawing.
Updated On: 05/12/2019
The Select All, Layer, Colour and Style commands offer a way to quickly select all or specific items.
Updated On: 05/12/2019
Learn how to make a symbol from entities already within a drawing.
Updated On: 05/12/2019
Learn how to make a polyline from entities already within a drawing.
Updated On: 05/12/2019
Exploding an object into individual entities.
Updated On: 05/12/2019
Deleting single or multiple objects from within a drawing.
Updated On: 05/12/2019
Draw a line tangentially between 2 Arcs.
Updated On: 05/12/2019
Reset the insertion origin of a symbol.
Updated On: 05/12/2019
Learn how to create a linear dimension between 2 points.
Updated On: 05/12/2019
Learn how to add a radial dimension to an arc or circle.
Updated On: 05/12/2019
How to add a radial dimension around an arc.
Updated On: 05/12/2019
Add add an angular dimension to a drawing (using 3 points).
Updated On: 05/12/2019
Adding end to end linear dimensions along a row.
Updated On: 05/12/2019
Learn how to add multiple end to end linear dimensions by selecting end points in an area.
Updated On: 05/12/2019
Learn how to use the Draft it Text command to add text strings to drawings.
Updated On: 05/12/2019
Quickly change all occurrences of a text string on the entire drawing.
Updated On: 05/12/2019
How to define attributes (variable text strings) within symbols.
Updated On: 05/12/2019
Adding a single dimension arrow to a drawing.
Updated On: 05/12/2019
Adding a double dimension arrow to a drawing.
Updated On: 05/12/2019
How to set the datum for use with the datum dimensioning.
Updated On: 05/12/2019
Adding datum dimensions to to your drawing.
Updated On: 05/12/2019
Creating a gap between crossing dimension leader lines.
Updated On: 05/12/2019
Learn how to add walls to your plans.
Updated On: 05/12/2019
Learn how to insert windows in to walls automatically creating the opening.
Updated On: 05/12/2019
Learn how to insert doors in to walls automatically creating the opening.
Updated On: 05/12/2019
Learn how to create openings in Draft it walls.
Updated On: 05/12/2019
Adding roofs to your architectural plans.
Updated On: 05/12/2019
Learn how to change the appearance of the different Draft it wall types.
Updated On: 05/12/2019
Automatically creating elevation views directly from the plan view.
Updated On: 05/12/2019
Using the 3D viewer to examine or present your building design.
Updated On: 05/12/2019
Adding staircases to your drawing plans.
Updated On: 05/12/2019
Adding hatch patterns to areas of elevation views.
Updated On: 05/12/2019
How to use the level command to setup multi-storey elevation views.
Updated On: 05/12/2019
Adding standard section details to your drawings.
Updated On: 05/12/2019
How to zoom in on a particular area of the drawing using 2 points to define a box.
Updated On: 05/12/2019
Learn how to move the current view around the screen.
Updated On: 05/12/2019
Use this to view the extents of the drawing are zoomed to regardless of whether they are greater or smaller than the drawing sheet.
Updated On: 05/12/2019
Use this to view the full drawing sheet. The system will centre the drawing sheet.
Updated On: 05/12/2019
Set the default location for templates and Symbols as well as control of the 'Autosave' feature.
Updated On: 05/12/2019
Zoom in to the current view by a factor of 2. This command will zoom to the centre of the current view.
Updated On: 05/12/2019
Zoom out from the current view by a factor of 2. This command will zoom to the centre of the current view.
Updated On: 05/12/2019
Learn how to alter the page size, orientation and scale.
Updated On: 05/12/2019
Manage all layer settings in the layer dialog box including visibility, colours, styles as well as creating and deleting and adding layers to groups.
Updated On: 05/12/2019
Manage all linear and angular unit settings, including unit type, precision and cursor increment.
Updated On: 05/12/2019
Control the display of various system elements including background colour, borders, captions and more.
Updated On: 05/12/2019
Each dimension on a Draft it drawing has a style. You can use Dimension Styles to control the appearance of dimensions.
Updated On: 05/12/2019
The Points command allows the appearance and size of Points to be changed.
Updated On: 05/12/2019
Create a automatically filled polyline.
Updated On: 05/12/2019
How to save to current zoom view. Once saved it can ne zoomed to or printed.
Updated On: 05/12/2019
Control all system grid settings and the various drawing snap types.
Updated On: 05/12/2019
This command measures the distance between two points.
Updated On: 05/12/2019
Draft it supports 'Pen Sets' which allow you to easily switch colours and thicknesses to transform drawing styles.
Updated On: 05/12/2019
The command reports the selected entity information using the current Units and Display Precision Settings.
Updated On: 05/12/2019
Change various Draft it settings back to the default values loaded by the installation program.
Updated On: 05/12/2019
Use Skins to change the Draft it colour scheme.
Updated On: 05/12/2019
Single and multiple selections are possible and items can be added to and removed from the current 'selection set'.
Updated On: 05/12/2019
The main ribbon can be switched on/off as required. When of this is set to off it obviously allows more of the screen area to be available for displaying the drawing.
Updated On: 05/12/2019
The Properties Explorer displays the settings of the item being drawn or modified.
Updated On: 05/12/2019
Layouts are used to offer greater flexibility to printing and drawing output requirements.
Updated On: 05/12/2019
Any Draft it drawing can be used as a symbol. Learn how to insert a symbol.
Updated On: 05/12/2019
Learn how to change the colour, layer and style of entities.
Updated On: 05/12/2019
How to quickly create your own template drawings including pre-defined set of parameters and settings.
Updated On: 05/12/2019
Once selected a Draft it entity displays entity 'handles', these can be used to edit the item.
Updated On: 05/12/2019
Learn how to print drawings to a particular scale.
Updated On: 05/12/2019
Control the display and content of the Quick Access Toolbar.
Updated On: 05/12/2019
If you need help deciding which of our CAD systems is right for you.
Or maybe you need to chat about our bespoke development service.
Call us, email us, we are here to help.
+44 1543 419 886
enquiries@cadlogic.com
Postal Address Details